Storing And Recalling User Settings; Storing User Settings - Datavideo SE-900 Instruction Manual

Storing and Recalling USER Settings

The SE-900 can store up to three sets of USER Settings. These settings contain all the custom information
that you have programmed into the SE-900. Information includes, the type of inputs, the colour correction for
each channel, LOGO settings, Chroma Key settings, Preset Effects, Audio Delay settings, Control Panel
preferences etc.
It can be useful to store different settings for different venues, or occasions, or just as a safeguard in case
someone sets something incorrectly.

Storing User Settings

Once you have everything set up as you want it press the Settings Key to call up the Set Up Menus and
highlight option 11. STORE & RECALL Press the Enter Key to call up the STORE & RECALL Menu.
Highlight STORE TO : USER_1 and press the Enter Key, then use the Adjustment Knob to select the
USER Store that you want to use 1 ~3. Once you have selected the right number press the Enter Key. You
will see a brief "Waiting for store" countdown.
Once the Waiting for store message has gone you gone press the ESC Key three times to leave the Set Up
Menus, and resume normal operation.
The USER Stores are non-volatile; they are still stored when the SE-900 is switched off. To change a USER
Store, just overwrite it.
N.B. Option 4: RESET ALL will erase your USER Stores. If you RESET ALL you will need to set up the
SE-900 from the start.
74