Brightness, Contrast, Saturation; Rgb Correction - Datavideo SE-900 Instruction Manual

Brightness, Contrast, Saturation

Brightness, Contrast and Saturation are all set in the same way. This is how to set up the Brightness, use the
same procedure for Contrast or Saturation.
Having selected the Channel No. use the Adjustment Knob to scroll down and highlight 2. BRIGHTNESS.
Press the Enter Key so that the Brightness value is highlighted and then use the Adjustment Knob to set the
value. Once set press the Enter Key.
You can set the Contrast and Saturation in the same way.

RGB Correction

Having selected the Channel No. use the Adjustment Knob to scroll down and highlight 5. RGB
CORRECTION. Press the Enter Key so that the RGB Correction value is highlighted.
You will see the RGB values are an X and a Y value; these are based upon the position of the Joystick. The
X Axis is horizontal movement and the Y Axis is vertical movement; +00 / +00 is the central position.
With the RGB Values highlighted press the RGB Key to activate the Joystick for Colour Correction.
As you move the Joystick you will see the X and Y values change. You will also see that the colour balance
of the channel changes. The three coloured segments surrounding the Joystick are a guide; movement up
will add blue, to the right will add red, and to the left will add green. Of course you can move in any direction,
so any colour can be achieved.
When the colour balance is correct press the Enter Key, to switch off RGB Correction and save the value.
N.B. If you want to use the same colour balance on other channels, do not touch the Joystick.
Go to the top of the menu and change the VIDEO_IN CH., go back down to 5.RGB CORRECTION,
press the Enter Key, press the RGB Key and then press the Enter Key again.
51