Level / Speed - Datavideo SE-900 Instruction Manual

Level / Speed

The Level / Speed keys set the speed or level of a transition or effect.
Each preset will store an effect or transition together with the speed,
border setting and screen position, where applicable.
To access presets F1 to F5 simply press the respective key. To
access presets F6 to F10 first press the F6-10 key, so that it lights
up as active and then press F1 for F6, F2 for F7 and so on.
For more information about programming the presets please see
Storing and Recalling Presets
The Level / Speed Keys are used to set the Speed of a wipe or
dissolve, or the level of the Mosaic, Paint and Strobe effects.
The selected Level / Speed is indicated by the active key and is also
shown in the Status Display
42