Chapter 3 Device Initialization; User Memory - Datavideo SE-4000 Instruction Manual

Chapter 3
After the SE-4000 is booted up, there are initial settings that you should configure on the
GUI. These initial settings will be discussed in this chapter.
You should see the GUI shown below on the LCD screen.
Various initial settings are listed as follows:

User memory


Wipe effects

Picture in picture

Audio

AUX

Still pictures

Keyer

Cross Point

Tap the gear icon at the top right corner to open the main menu of the
interface.
3.1 User Memory
The user memory allows you to load pre-saved settings configured for a specific scenario.
Simply tap one of the buttons to immediately load the settings. The button icons should
allow you to identify the settings saved therein.
Device Initialization
25
graphical user