Ext. Genlock; System; 10. Controller; 11. Store & Recall - Datavideo SE-900 Instruction Manual

8. EXT. GENLOCK

Title
1: GENLOCK SOURCE
2: VERTICAL OFFSET
3: HORIZONTAL OFFSET
4: CLOCK OFFSET

9. SYSTEM

Title
1: GPI SETTING
2: SPEED KEY SETTING

10. CONTROLLER

Title
1: LCD CONTRAST
2: LCD BACK LIGHT
3: SWITCH COLOR
4: SWITCH BRIGHTNESS
5: CUT KEY AT BOTTOM
6: TEST KEY
In TEST KEY mode values will be displayed for the UP / DOWN Adjustment Knob, Joystick and T Bar E.G.
* * * * * * * *
U / D
JOY_STICK X = +00 Y = +00
T_BAR = 254
11. STORE & RECALL
Title
1: STORE FUNC. KEY
2: RECALL FROM
3: STORE TO
4: RESET ALL
Values
INTERNAL / EXTERNAL
0 ~ 625
0 ~ 1728
0 ~ 255
Values
Values
* * * * - - - -
* * * * * * * *
* * * * - - - -
* * * * * * * *
DEFAULT / SWAP
* * -
* * *
NO / YES
* * *
Values
F1 - F10
USER_1 - USER_3
USER_1 - USER_3
Press RESET for 2 SEC
27
Description
When set to external the SE-900 will fall into
sync with a reference signal supplied via card
slot 10
___ / 256 CLOCK (27MHz)
Description
Allows set up of GPI socket on card 15 and
GPI TAKE button on the Control Panel. See
page 72 also.
Allows speed keys 1~6 to be set for transition
times of between 1~90 frames
Description
Sets the contrast of the LCD display panel
Sets the brightness of the LCD display panel
Sets the colour of the backlight on the
controller
Sets the colour of the backlight on the
controller
Allows CUT and TAKE key positions to be
swapped
Goes into keyboard test mode.
Description
Used to store transitions to the 10 preset keys.
Recalls settings from one of the three user
memories. All user preferences are recalled.
Stores all current settings to one of three user
memories. All settings and preferences are
stored.
Resets the SE-900 to factory defaults.