Checking Firmware Revisions - Datavideo SE-900 Instruction Manual

Checking Firmware Revisions

To check the firmware revision for each board within the SE-900, press the Settings Key to call up the Set
Up Menus and highlight option 12. UPDATE FIRMWARE. Press the Enter Key to call up the Update Menu.
Highlight 3: READ VERSION and press the Enter Key, this will call up page 1 of the Software Version Sub
Menu.
You can see the firmware versions for each board, and check them against the latest release notes. To view
Page 2 press the Up or Down Key, or turn the Adjustment Knob.
To leave the menu press the ESC Key three times.
See pages 28 and 29 also.
79