Logo (Luma Key); Cg Input - Datavideo SE-900 Instruction Manual

4. LOGO (LUMA KEY)

Title
1: Source
2: KEY LEVEL MAX.
3: KEY LEVEL MIN
4: TRANSPARENCY
5: LOGO1 ON/OFF
6: LOGO1 POSITION X
7: LOGO1 POSITION Y
8: LOGO2 ON/OFF
9: LOGO2 POSITION X
10: LOGO2 POSITION Y
11: STORE LOGO DATA

5. CG INPUT

Title
1: MODE
2: KEY LEVEL MAX.
3: KEY LEVEL MIN.
4: TRANSPARENCY
5: VER. OFFSET OF SDI_IN
Values
INTERNAL / BG / CH 1 /
2 / 3 / 4 / 5 / 6 / 7 / 8 / NO
0 - 255
0 - 255
0 -100
ON / OFF
1 - 147
1 - 119
ON / OFF
1 - 147
1 - 119
LOGO_1 / LOGO_2
Values
INTERNAL / EXTERNAL
0 - 255
0 - 255
0 - 100
0 - 32
25
Description
Sets the Luma Key source.
Sets the maximum value for the luma keyer.
0 would key just pure black, 255 would key
everything from pure black to pure white.
Default is 20.
Sets the minimum value for the luma keyer.
Default is 0.
Sets the transparency level of the Logo - 0 is
opaque, 100 is very transparent.
Switches LOGO 1 On or Off
Sets the position of LOGO 1. 0 is fully to the
left 147 fully to the right
Sets the position of LOGO 1. 1 is at the top
119 is at the bottom.
Switches LOGO 2 On or Off
Sets the position of LOGO 2. 0 is fully to the
left 147 fully to the right
Sets the position of LOGO 2. 1 is at the top
119 is at the bottom.
Uploads .bmp images to LOGO 1 or LOGO 2.
Description
Sets the CG Overlay to Internal or External.
Sets the maximum (upper end) value for the
keyer.
0 would key just pure black, 255 would key
everything from pure black to pure white.
Default is 20.
Applies to INTERNAL Mode only.
Sets the minimum value (lower end) for the
keyer.
Default is 0
Applies to INTERNAL Mode only.
Sets the transparency level of the overlay - 0
is opaque, 100 is very transparent.
Applies to INTERNAL Mode only.
Used to correct the alignment of the SDI
overlay with the video image.