Video Out - Datavideo SE-900 Instruction Manual

6: AGC
7: 7.5 IRE
The following options only appear with SDI Input Boards
6: VITC DECODE
7: VITC POS.
8: VER. OFFSET OF SDI_IN
9: SDI_AUDIO_CHANNEL
The following options only appear with DVI VGA input Boards
8: VGA/DVI INPUT MODE
9.VGA/DVI DISP. SIZE

3. VIDEO OUT

Title
(ANALOG & DV OUT)
1: DV OUT MODE
2: V. OUT 7.5 IRE
3: ASPECT RATIO
(SDI OUT)
1: BLACK_BURST / CV.
2: ASPECT RATIO
NC / ON / OFF
NC / ON / OFF
Line 6 – 22 or OFF
Positions 1 – 7 Top
Positions 8 -15 Bottom
0 - 32
1/2 / 3/4 / 5/6 / 7/8 / 9/10 /
11/12 / 13/14 / 15/16 /
MUTE
800x600, 1024x768 or
1280x1024
90 % or 95 %
Values
MODE_1 / 2 / 0
ON / OFF
4:3 or 16:9
BLACK_BURST / CV.
4:3 or 16:9
24
Only available for Y/C and CV Inputs.
Automatic Gain Control - ON / OFF. This is set
per channel and is non-volatile.
Applies to NTSC set up only.
Sets the IRE (black level) to 0 or 7.5.
This setting allows SDI embedded Timecode
to be decoded and displayed within the video
frame.
This setting allows the displayed Timecode to
be placed either at the top or bottom of the
video frame.
Sets the vertical Offset of the SDI Input
Channel. This is set per channel and is non-
volatile.
Selects the SDI Audio Input Channel for de-
embedding. This is set per channel and is
non-volatile.
Set to match the resolution of the computer
graphics output. Only compatible with 60Hz
refresh rate.
Description
Sets the type of DV Output, for different
computers and DV devices.
MODE_1 = Windows XP PC
MODE_2 = Windows 2000 PC
MODE_3 = MAC
MODE_0 = CAMCORDER / DV DECK /
Datavideo DN-300/400/500
Sets the IRE (black level) to 0 or 7.5. This is
only necessary for NTSC set up.
Sets the Black Burst / CV Output on the SDI
Board to either BLACK_BURST or Composite
Video.