Table of Contents
Advertisement
5-3 Cleaning
● Cleaning the UPS
Wipe the UPS lightly by tight squeezed soft cloth soaked with water or detergent
Do not use chemicals such as thinner and benzene. (They cause deformation or discoloration.)
● Removing dust from the Power Plug
• Turn off connected devices and the Power Switch of the UPS.
• Disconnect the 100 VAC Input Plug from a wall outlet (commercial power) and remove dust around the
plug with a dry cloth.
• Disconnect the AC plugs of the connected devices from the UPS and clean them also.
• Connect the AC plugs of the connected devices to the UPS again, and connect the 100 VAC Input Plug
of the UPS to a wall outlet (commercial power).
(For information on the connection procedure:)
"2. Installation and connection" ➛ Page 10
See also
29
5. Maintenance and inspection
Advertisement
Table of Contents
