Table of Contents
Advertisement
2. Installation and connection
2. Installation and connection
2-1 Precautions and notes on installation and connection
Carry the unit considering its weight and balance and place it on a stable
and robust base.
● Dropping or toppling the unit may cause injury.
● The weight of the unit is approximately 7.7 kg.
● If you drop the unit, stop using it and the unit must be inspected and/or repaired.
For repair, contact us; ____
Keep plastic package bags out of reach of children.
● They may put their head into it, and may be suffocated.
Be sure to connect the input plug of the unit to a wall outlet (commercial
power) of 100VAC (50/60Hz).
● Connecting it to a wall outlet (commercial power) of a different voltage may cause a fire.
● The unit may fail.
Connect the unit to a wall outlet (commercial power) with a current capacity
larger than 12A.
● Otherwise, the power cord may be heated.
● When the equipment of the maximum output capacity is connected, the current flows up to
12A.
Provide secure grounding.
● For a 3P wall outlet, directly connect the 100 VAC input plug of the unit to it.
(Refer to "2. Installation and connection" on page 13.)
Not doing so may cause an electric shock in case of a operation failure or any leakage.
● When you use the 3P-2P Conversion Plug for the 100 VAC input plug, be sure to perform
grounding before connecting the 100 VAC Input Plug into a wall outlet (commercial power).
Do not disconnect the grounding before disconnecting the 100 VAC input plug from a wall
outlet (commercial power).
● Grounding is necessary to enable its surge protection function. For repair, contact us; ____
Do not disassemble, repair, or modify the unit.
● Doing so may cause an electric shock or a fire.
Do not install the unit in other than specified orientations.
● Dropping or toppling the unit may cause injury.
● If you install the unit in an orientation other than specified, the unit cannot be protected from a
battery fluid leakage.
When installing the unit vertically, do not put any object on it.
When installing the unit horizontally, do not put any object heavier than
25kg.
● Doing so may cause distortion of/damage to the case, which may cause a fire.
Caution
(for installation and connection)
10
Advertisement
Table of Contents
