Omron POWLI BX75XS2 Instruction Manual page 2

Table of Contents

Advertisement

Introduction
Introduction
Thank you for purchasing the POWLI BX75XS2 Uninterruptible Power Supply (UPS).
the unit is designed specifically to personal computers.
● It protects (backs up) personal computers, displays, peripherals, and so on up to a power
consumption of 750VA/450W from failure of power supply such as power failures and volt-
age variations.
● It protects connected devices from surge coming from power line.
● You can easily replace batteries by yourself.
Read this manual thoroughly to make the most of the unit.
Notes on the use of the Unit
● The unit is designed and manufactured for use for OA equipment such as personal computers.
Do not use it when very high reliability and safety are required as listed below.
• Medical equipment that may cause death directly
• Applications that may cause injury (applications that directly affect the operation and control
of planes, ships, railroads, elevators, and so on)
• Applications that are always subjected to vibration such as cars and ships
• Applications in which a failure of this product may cause significant damage or effect to
the society and public
(essential computer systems, main communication equipment, public transportation
systems, and so on)
• Equipment with the same level of importance
● For equipment that greatly affects the safety of people and maintaining public functions,
special considerations must be taken for operation, maintenance, and management, such
as duplication of the system and emergency power generation facilities.
● Observe the contents of this manual such as the use conditions and environments.
● If you want to use the unit for an important system that requires very high reliability, contact
us;______
● Do not modify/alter the unit.
● The unit is designed for use inside Japan only. Do not use it in foreign countries.
• If the voltage or frequency of the power supply differs, a failure or fire may occur.
• the unit does not comply with overseas safety standards and the EMI standards/regula-
tions.
• For power supply, use a commercial power of AC100V (50Hz/60Hz).
Disclaimers
We are not liable to all damage including malfunction and failure of equipment, connected devices,
and software and other secondary damage even if it is caused by the use of our product.
©OMRON Corporation. 2002 All Rights Reserved.

Advertisement

Table of Contents
loading

Table of Contents