2-2 Installation and connection
Connection to back up your computer and peripherals
(1) Disconnect all AC input plugs of your computer and peripherals from a wall outlet (commercial power).
(2) Install the unit.
Write the date of starting use on the label on the side.
● Do not use this unit in an orientation other than the correct ones shown in the figure below.
Vertical
* Stick the attached rubber feet in the 4 corners on the bottom surface.
Wall outlet
(commercial power)
Correct installation orientation
Wrong installation orientation
✕
Placing the front
downward.
Computer
Modem or other
peripheral
Horizontal
✕
Placing the rear
downward.
13
2. Installation and connection
✕
Placing the left side
downward.