Programming A Buttonhole - DURKOPP ADLER 580 Operating Instructions Manual

10.5.3 Programming of a buttonhole
"P"-key Press the "P"-key in order to switch from the main level
to the menu for programming buttonholes.
Keys ñò Select with the ñò keys the menu item "buttonhole
number."
"OK"-key Press the "OK"-key to activate the menu item.
Keys ñò Select with the ñò keys the buttonhole that you want
to alter.
"OK"-key Press the "OK"-key.
Keys ñò Select with the ñò keys the menu item "tack type".
"OK"-key Press the "OK"-key to activate the menu item.
Keys ñò Select with the ñò keys the tack type of the selected
buttonhole.
"OK"-key Press the "OK"-key.
Important note!
When altering the tack type of a buttonhole program, all other values
of the buttonhole are reset to the standard value!.
Thus always select the tack type first, before you set all the
other values of a buttonhole!
–
Now adjust all the other parameters according to your needs.
35