Sequences; General; Switching On / Off The Sequence Mode - DURKOPP ADLER 580 Operating Instructions Manual

10.6 Sequences

10.6.1 General notes
10.6.2 Switching the sequence mode on or off
Sequence mode
The operator (seamstress) will be able to sew several buttonholes with
different parameters successively without having to touch a key on
the control panel.
·
Each sequence can contain up to 9 different buttonholes. Each
different buttonhole within a sequence can be sewn repeatedly up
to 9 times.
·
25 different sequences can be created and memorized.
·
In general all buttonholes can be selected in a sequence.
Single buttonhole mode
You can select a buttonhole out of 50 preset buttonhole programs.
This buttonhole will be sewn until another buttonhole is selected.
"S"-key Press the "S"-key to switch from the main menu to the
menu for programming the buttonhole sequences.
keys ñò Select the menu item "sequence number" with the ñò
keys.
"OK"-key Press the "OK"-key to activate the menu item.
keys ñò Select the sequence number "0" with the ñò keys.
The sequence mode is switched off.
"ESC"-key Press the "ESC"-key.
You will get back to the main level.
or
"ç"-key Press the "ç"-key.
You will get one level back.
Important note!
With any other sequence number the sequence mode is switched on.
39