Inter-Tel Axxess Administrator's Manual page 135

FEATURE NAME
Directory
Display Outside Party Name On/Off
Display Time/Date
Do-Not-Disturb
Do-Not-Disturb Cancel
Do-Not-Disturb On/Off
Do-Not-Disturb Override
Enhanced Speakerphone Enable
Feature Key Default
Group Listen
Handsfree On/Off
Headset Enable
Headset Disable
Headset On/Off
Station Feature Codes
®
AXXESS ADMINISTRATOR'S GUIDE – January 2004
CODE
307 (Display Phones Only) Allows display phone users to
search for extension numbers or system speed-dial num-
bers. The number can then be dialed, if desired. The
Directories premium feature is required.
379 (Display Phones Only) When the phone user enters this
feature code, while connected to a CO call that has out-
side party name information, the display will toggle
between the caller's name and number. If there is no out-
side party name or the Expanded CO Call Information On
Displays flag is disabled, the user will hear a burst of reor-
der tone and see the CANNOT ACCESS FEATURE dis-
play. If the Display Outside Party Name On/Off feature
code is programmed in a user programmable button with
a lamp, the lamp will be lit when the outside party name is
enabled and off when the outside party number is
enabled.
300 (Display Phones Only) Temporarily displays the system
date and time, username, and extension number during a
call or when other displays are shown.
NOTE:
Feature code 300 displays the IP Address of an
endpoint if it is in SIP mode (see
370 The Do-Not-Disturb feature code halts all intercom calls,
371 transferred calls, and pages to the station. The Cancel
372 code returns the station to normal operation. The on/off
code can be used to turn Do-Not-Disturb on or off. (Inter-
Tel phones use the DND button.)
373 (Inter-Tel Phones Only) If enabled in the database, allows
the phone user to break through another station's Do-Not-
Disturb mode when placing an intercom call
310 (Digital Phones Only) When entered at a Digital Phone
station, this feature code enables the enhanced speaker-
phone as described on
use the Special button + Speaker buttons.)
395 (Inter-Tel Phones Only) Phones have user-programmable
feature buttons that can be set to enter feature codes.
This code returns the user-programmable buttons to the
database default values.
312 (Inter-Tel Phones Only) Allows a user to transmit a con-
versation over the phone speaker while in handset or
headset mode
319 (Inter-Tel Phones Only) Disables/enables the phone's
handsfree intercom answering. Incoming intercom calls
ring as private calls if handsfree answering is disabled.
315 (Inter-Tel Phones Only) The enable code signals the sys-
316 tem that a headset has been connected to the phone. The
317 disable code returns the phone to normal operation. The
on/off feature code can be used to toggle the feature on or
off.
System Features
DEFINITION (Continued)
page 105).
page 76. (Digital Phones can also
Page 119