Basic Operation; Playing Your Av Components - Integra DTR-7.7 Instruction Manual

Playing Your AV Components

Basic AV Receiver Operation
1
AV receiver
2
3
Remote
controller
AV receiver
4
46
1
Use the AV receiver's input selector buttons to select the input source.
Remote
controller
To select the input source with the remote controller, press the [Receiver]
Remote Mode button, and then use the Input Selector buttons.
On the remote controller, the [V1], [V2], [V3], and [V4] buttons select the VIDEO 1,
VIDEO 2, VIDEO 3, and VIDEO 4 input sources respectively.
Start playback on the source component.
To watch a DVD or other video source, on your TV, select the video input that's con-
nected to the AV receiver's COMPONENT VIDEO OUT, HDMI OUT, or MONITOR
OUT.
On some DVD players, you may need to change the digital or HDMI audio output
settings.
To adjust the volume, use the Master Volume control or the remote con-
troller's [VOL] button.
Since the AV receiver is designed for home theaters, it has a wide volume range for
precise adjustment. The volume can be set to –∞ dB, –81 dB, –80 dB through +18 dB.
VOL
Select a listening mode and enjoy!
See "Using the Listening Modes" on page 56.
3
1
1
3