Digital Audio Input Setup - Integra DTR-7.7 Instruction Manual

First Time Setup—Continued

Digital Audio Input Setup

1
2
If you connect a component to a digital input, you must
assign that input to an input selector. For example, if you
connect your CD player to OPTICAL IN 2, you must
assign OPTICAL IN 2 to the CD input selector.
Here are the default assignments.
Input selector
DVD
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
TAPE
CD
PHONO
*
The front panel optical DIGITAL input.
• When HDMI IN 1 or 2 is assigned to an input selector
in the "HDMI Video Setup" on page 41, the input
selector assignment on this page is automatically set to
HDMI 1 or HDMI 2.
2, 3
1, 4
Default assignment
Coax 1
Opt 1
- - - - -
Opt 2
*
Front
- - - - -
Opt 3
- - - - -
1 Press the [Receiver] button, fol-
lowed by the [Setup] button.
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "2. Digital
Input," and then press [Enter].
The Digital Input menu appears.
2.Digital Input
------------------------
a.DVD
b.VIDEO1
c.VIDEO2
d.VIDEO3
e.VIDEO4
f.TAPE
g.CD
h.PHONO
3
Use the Up and Down [
buttons to select an input selec-
tor, and then use the Left and
Right [
Coax 1, Coax 2, Opt 1, Opt 2,
Opt 3, Opt 4, or - - - - - (analog).
For input selectors that you want to use
with an analog input, select "- - - - -."
• Inputs cannot be assigned to the
TUNER input selector.
• The front panel optical DIGITAL
input (i.e., Front) can only be
assigned to the VIDEO 4 input selec-
tor.
• Only "Front" or "- - - - -" can be
selected for the VIDEO 4 input selec-
tor.
• An input selector that's been
assigned to IN1 or IN2 in the "HDMI
Video Setup" (page 41) can be set to
HDMI here.
4 Press the [Setup] button.
Setup closes.
Note:
• This procedure can also be performed on the AV
receiver by using its [Setup] button, arrow buttons, and
[Enter] button.
]/[ ]
:Coax1
:Opt1
:-----
:Opt2
:Front
:-----
:Opt3
:-----
]/[ ]
]/[ ] buttons to select:
43