Rear Panel - Integra DTR-7.7 Instruction Manual

Getting to Know the AV Receiver—Continued

Rear Panel

1 2 3
O P Q R S
A
OPTICAL DIGITAL
These optical digital audio inputs are for connecting
components with optical digital audio outputs, such
as CD players and DVD players.
The optical digital audio output is for connecting a
digital recorder with an optical digital input, such as
a CD recorder.
B
COAXIAL DIGITAL
These coaxial digital audio inputs are for connect-
ing components with coaxial digital audio outputs,
such as CD players and DVD players.
C
HDMI IN 1, 2, and OUT
HDMI (High Definition Multimedia Interface) con-
nections carry digital audio and digital video.
The HDMI inputs are for connecting components
with HDMI outputs, such as DVD players.
The HDMI output is for connecting a TV or projec-
tor with an HDMI input.
D
COMPONENT VIDEO IN 1, 2, and 3
These RCA component video inputs are for con-
necting components with component video outputs,
such as DVD players.
E
COMPONENT VIDEO OUT
This RCA component video output is for connect-
ing a TV or projector with a component video input.
F
XM antenna (on North American model)
This jack is for connecting an XM digital antenna,
sold separately.
G
AM ANTENNA
These push terminals are for connecting an AM
antenna.
10
6
Only on the North American model
7 8 9 J
4 5
T U
K L
V W X
H
MONITOR OUT
The S-Video or composite video jack should be
connected to a video input on your TV or projector.
I
FM ANTENNA
This jack is for connecting an FM antenna.
J
12V TRIGGER OUT (A/B/C)
These outputs can be connected to the 12-volt trig-
ger inputs on other components.
K
IR IN A/B and OUT
A commercially available IR receiver can be con-
nected to the IR IN A or B jack, allowing you to
control the AV receiver while you're in Zone 2, or
control it when it's out of sight, for example,
installed in a cabinet.
A commercially available IR emitter can be con-
nected to the IR OUT jack to pass IR (infrared)
remote control signals along to other components.
L
ZONE 2 OUT L/R and SUBWOOFER
The L/R jacks can be connected to a line input on an
amplifier in Zone 2. The SUBWOOFER jack can be
connected to the input on a powered subwoofer in
Zone 2.
M
RS232
This port is for connecting the AV receiver to home
automation equipment and external controllers.
N
AC INLET
This connector is for connecting the supplied power
cord.
N
M
Y Z