Playing Your Av Components; Basic Av Receiver Operation - Integra DTR 5.9 Instruction Manual

Playing Your AV Components

Basic AV Receiver Operation

1
AV receiver
2
3
AV receiver
4
48
Downloaded from www.Manualslib.com
1
Use the AV receiver's input selector buttons to select an input source.
Remote
controller To select an input source with the remote controller, press its Input Selec-
tor buttons.
To listen to a DVD player connected to the multichannel DVD input (page 26), press
the AV receiver's [Multi CH] button. The MULTI CH indicator will appear on the dis-
play.
Note:
• While the multichannel DVD input is selected, the Speaker Configuration settings on
page 82 are ignored, and signals from the multichannel input are fed to the speakers
as they are.
Start playback on the source component.
To watch a DVD or other video source, on your TV, select the video input that's con-
nected to the AV receiver's COMPONENT VIDEO OUT, HDMI OUT, or MONITOR
OUT.
On some DVD players, you may need to change the digital or HDMI audio output
settings.
To adjust the volume, use the Master Volume control or the remote con-
troller's [VOL] button.
Remote
Since the AV receiver is designed for home theaters, it has a wide volume range for
controller
precise adjustment. The volume can be set to Min, 1 through 79, or Max.
The maximum volume level can be limited with the Maximum Volume setting. See on
page 88.
Select a listening mode and enjoy!
See "Using the Listening Modes" on page 67.
manuals search engine
3
1
3