Component Video Setup - Integra DTR-7.7 Instruction Manual

First Time Setup—Continued

Component Video Setup

1
2
If you connect a video component to COMPONENT
VIDEO IN 1, 2, or 3, you must assign that input to an
input selector. For example, if you connect your DVD
player to COMPONENT IN 3, you must assign COM-
PONENT IN 3 to the DVD input selector.
To upconvert ( ) composite video and S-Video sources
*
and output them from the component video output,
select the "- - -" option.
Composite, S-Video
Composite, S-Video
Here are the default assignments.
Input selector
DVD
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
42
2, 3
1, 4
Component
IN
( )
*
OUT
Component
Default assignment
IN1
- - -
- - -
- - -
- - -
1 Press the [Receiver] button, fol-
lowed by the [Setup] button.
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "1. Component
Video," and then press [Enter].
The Component Video menu appears.
1.Component Video
------------------------
a.DVD
b.VIDEO1
c.VIDEO2
d.VIDEO3
e.VIDEO4
3
Use the Up and Down [
buttons to select an input selec-
tor, and use the Left and Right
[ ]/[
IN1: Select if the video component
IN2: Select if the video component
IN3: Select if the video component
- - -: Select to output composite
4
Press the [Setup] button.
Setup closes.
Notes:
• This procedure can also be performed on the AV
receiver by using its [Setup] button, arrow buttons, and
[Enter] button.
• When the input selector assignment for the COMPO-
NENT VIDEO IN jacks is set to IN1, IN2 or IN3, the
"composite video to S-Video" and "S-Video to com-
posite video" conversions will not work.
]/[
:IN1
:---
:---
:---
:---
]/[
] buttons to select:
is connected to COMPO-
NENT VIDEO IN 1.
is connected to COMPO-
NENT VIDEO IN 2.
is connected to COMPO-
NENT VIDEO IN 3.
video and S-Video sources
from the COMPONENT
VIDEO OUT.
]
]