Using the Listening Modes
Selecting the Listening Modes
For a description of each listening mode, see "About the
Listening Modes" on page 58.
• The Dolby Digital and DTS listening modes
can only be selected if your DVD player is
connected to the AV receiver with a digital
audio connection (coaxial, optical, or HDMI).
• Listening mode availability depends on the
format of the current input signal.
• While a pair of headphones is connected,
you can only select the Mono, Direct, or Ste-
reo listening mode.
Selecting on the AV Receiver
■ [Stereo] button
This button selects the Stereo listening mode.
■ Listening Mode [
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
56
Stereo
Listening Mode
]/[
] buttons
Selecting with the Remote Controller
Stereo
Surround
Direct
■ [Stereo] button
This button selects the Stereo listening mode.
■ [Surround] button
This button selects the Dolby Digital and DTS listen-
ing modes.
■ Listening Mode [
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
■ [Direct] button
This button selects the Direct listening mode.
■ [THX] button
This button selects the THX listening modes.
■ [All ST] button
This button selects the All Channel Stereo listening
mode.
,
All ST
THX
]/[
] buttons