Component Video Setup - Integra DTR-4.5 Instruction Manual

First Time Setup—Continued

Component Video Setup

If you connect to a COMPONENT VIDEO IN, you must
assign it to an input selector. For example, if you connect
your DVD player to COMPONENT IN 3, you should
assign it to the DVD input selector.
Input Analog audio
selector
DVD
VIDEO 1
VIDEO 2
VIDEO 3
1
Press the [Receiver] button fol-
lowed by the [Setup] button.
Receiver
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "1. Initial
Setup," and then press [Enter].
Enter
The initial Setup menu appears.
Enter
3
Use the Up and Down [
buttons to select "2. Component
Video," and then press the
Enter
[Enter] button.
The Component Video Setup menu
appears.
Enter
38
COMPONENT
input (fixed) VIDEO IN jack
DVD IN 1
VIDEO 1 Last
VIDEO 2 Last
VIDEO 3 Last
Menu
------------------------
Basic Setup
1.Initial Setup
1.Initial Setup
------------------------
2.Speaker Setup
1.Digital Input
1-2.Component Video
------------------------ 2.Component Video
Advanced Setup
3.Hardware Setup a.DVD/MULTICH :IN1
3.Surround Setup
b.VIDEO1 :Last
4.Audio Adjust
c.VIDEO2 :Last
5.Listening Mode Preset
d.VIDEO3 :Last
6.Preference
4
Enter
5
Notes:
• If you select Last, the video source remains the same
]/[ ]
when you select another input selector. For example,
if you set VIDEO 1 to Last, select the DVD input
selector, then select the VIDEO 1 input selector, you
can watch a DVD while listening to audio from the
component connected to the VIDEO 1 IN L/R jacks.
• This procedure can also be performed on the AV
receiver by using its [Setup] button, arrow buttons, and
[Enter] button.
]/[ ]
Use the Up and Down [
buttons to select an input selec-
tor, and then use the Left and
Right [ ]/[ ] buttons to select:
IN1: Use the video component
connected to COMPO-
NENT VIDEO IN 1.
IN2: Use the video component
connected to COMPO-
NENT VIDEO IN 2.
IN3: Use the video component
connected to COMPO-
NENT VIDEO IN 3.
Last: Select this for audio-only
components.
Press the [Setup] button.
The setup menu closes.
]/[ ]