How To Load Printer Paper - Omron HBP-9020 Instruction Manual

How to Load Printer Paper

To print measurement results, load printer paper and set the [PRINT] switch on the back of the
monitor to "ON".
Set the print pattern in function selection mode. (Page 23)
• Thermal paper is used for the printer paper. The paper may discolor and the printing may fade, so make a
copy if it is necessary to store a record of the results.
• When about 1 m of the printer paper remains, a red line will appear. Load a new roll of printer paper.
• Do not load printer paper during initialization, measurement, or printing. This may cause a paper jam.
• Replacement printer paper is available as an option. For details, please contact your local authorized
OMRON dealer/supplier.
1.
Make sure that the [POWER]
switch is set to the ON position,
and the [PRINT] switch is set to
"ON".
• Switching the [PRINT] switch ON/OFF is only
effective in the standby display.
2.
Make sure that initialization,
measurement, printing are not taking
place, and remove the printer cover.
3.
Press the lock release button and open the paper cover.
14