Attach The Instruction Panel And The Elbow Rest Guide Plate; How To Connect To The Power Source - Omron HBP-9020 Instruction Manual

How to Install the Monitor
Attach the instruction panel
and the elbow rest guide
plate

How to connect to the power source

1.
Connect the provided power cord.
1)
Insert the socket side of the power cord into the
AC connector on the back of the monitor.
• Never use a power cord other than the provided power cord.
2)
Insert the power cord plug into the outlet.
2.
Make sure the power cord is connected
correctly.
Turn the [POWER] switch to the ON position in
order to turn on the power.
Check that the power light lights up.
12
Instruction panel
Elbow rest guide
plate