How To Set The Date And Time - Omron HBP-9020 Instruction Manual

How to Set the Date and Time

Turn on the power and follow the steps below to check the date and time.
A confirmation beep will sound each time a switch is pressed.
(If the sound volume is set to "0" in function selection mode, confirmation beeps will not sound.)
1. When the [MODE] switch is pressed in the standby display (when "0" appears in the diastolic blood
pressure display), the date display appears.
2. When the [MODE] switch is pressed again, the time display appears.
3. When the [MODE] switch is pressed again, the standby display appears.
* If no action is taken for about 10 seconds in the date display or time display, the display will return to the standby display.
Follow the steps below to change the date and time.
1.
Turn the [POWER] switch to the ON
position.
All lights turn on and then "0" appears on the
diastolic blood pressure display.
2.
Press the [MODE] switch to change to the
date display or the time display, and then
hold the [MODE] switch for at least 3
seconds.
The "Month" or "Hour" will blink to indicate that
the monitor is in change setting mode.
3.
Select the item to be changed by pressing
the [START/STOP] switch.
The item changes as follows each time the
[START/STOP] switch is pressed.
Date display: "Month" > "Day" > "Year" > "Month"...
Time display: "Hour" > "Minute" > "Hour"...
4.
Change the value by pressing the ▲ / ▼
switches.
Each time one of the switches is pressed, the
value increases/decreases by 1.
5.
To change another item, repeat steps 3 and 4.
6.
When the changes have been completed, press the [MODE] switch to exit change setting mode.
• "Second" reverts to zero when the [MODE] switch is pressed to exit "Hour" and "Minute" change setting mode.
• If no action is taken in change setting mode for about 30 seconds, the display will return to the standby display.
Note:
If the date appears when the power is turned on, set the date and time.
If the same display appears the next time the power is turned on, the backup battery must be
replaced.
Please contact your local authorized OMRON dealer/supplier.
Month
Day
Year
Hour
Minute
Second
13