Connecting The Monitor To The Line Voltage; Connecting The Pc To The Line Voltage - Fujitsu Siemens Computers SCENIC eD Operating Manual

Connecting the PC to the line voltage

Connecting the monitor to the line voltage

Prepare the monitor as described in the Operating Manual for the monitor.
Ê
Plug the data cable of the monitor into the monitor port of the system unit.
Ê
Plug the power cable of the monitor into the grounded power outlet.
Ê
Connecting the PC to the line voltage
100 V - 125 V
200 V - 240 V
Check the rated voltage.
Ê
The value shown or the value marked with an arrow must agree with the local line voltage:
!
115 = 100 V to 125 V
Push the switch in the appropriate direction.
Ê
Plug the system unit's power cable into the system unit (1) and then into the grounded power
Ê
outlet (2).
A26361-K622-Z100-1-7619
Preparation for use and operation
230 = 200 V to 240 V
1
2
13