Table of Contents
Advertisement
Preparing for use
Setting up the workstation
When installing your workstation, give consideration to the recommendations and safety
!
notes in the "Safety" booklet.
Set up your workstation only in its correct orientation. The points to observe are illustrated
on the following pages.
We recommend that you place your device on a surface with good anti-slip qualities. In
view of the multitude of different finishes and varnishes used on furniture, it is possible
that the rubber feet will mark the surface they stand on.
Do not expose the workstation to extreme environmental conditions (see "Technical data"
chapter). Protect it from dust, humidity and heat.
Provide at least 200 mm of clearance in front of , to the left of, and behind the fan area of
the casing to ensure adequate ventilation. In order to avoid overheating, do not cover the
ventilation area of the monitor or the workstation.
Do not place several workstations one above the other.
Connect the monitor, mouse and keyboard
The monitor, mouse and keyboard ports are located at the back and the front (possible USB and
audio interfaces) of the workstation.
Keyboard port / purple
Monitor port / blue
Connecting the monitor
►
Follow the instructions contained in the monitor manual to prepare the monitor for operation
(e.g. connecting cables).
►
Plug the data cable into the monitor port
8
PS/2 mouse port / green
USB port / black
of the workstation.
A26361-K665-Z125-1-7619, Edition 1
Advertisement
Table of Contents
