Canon imageRunner 6020 Reference Manual Reference Manual page 406

Remove the original from the platen glass.
Cause
Remedy
Remove the original from the feeder.
Cause
Remedy
Out of resources. Wait for a moment, then perform operation again.
Cause
Remedy
6
Set the IP Address.
Cause
Remedy
No response from the server. Check the settings.
Cause
Remedy
NetWare is in use. Wait for a moment, then perform operation again.
Cause
Remedy
6-36 List of Error Messages
: The original remains on the platen glass.
: Remove the original from the platen glass, and place the next document for
copying.
: The original is placed both in the feeder and on the platen glass. The specified
mode, which is programmed, requires the original placed on the platen glass
only.
: Remove the original from the feeder.
: You cannot browse the network, because the network is congested as a result
of continuous sending or heavy use of FTP or Windows (SMB).
: Wait a moment, and browse again.
: The IP address of the main machine has not been set.
: Set the IP address in Additional Functions and turn the main power back ON.
: The setting of the specified server is not correct or the server's power has not
been turned on.
Otherwise, resources may be insufficient.
: Wait for a while and try connecting again. If you cannot connect, select another
server.
: You cannot browse the network, as NetWare printing uses PServer or NDS
PServer.
: Browse again after NetWare printing is complete.