Toshiba RAS-M16PKVP-E Service Manual page 136

No. Part name
1. Detachment
Fan guard
10
1) Perform works of Detachment 1 of
Work on the cardboard, cloth, and etc. in order to
prevent damage on the product.
2) Take off the discharge port cabinet and put it as
3) Take off the hooking claws (8 positions) of the
2. Attachment
1) Push the hooking claws (8 positions) with hands
Check all the hooking claws are fixed at each
specified position.
1. Detachment
Fin guard
11
1) Remove the top plate. (Hexagonal screw Ø4 × 10, 6 pcs.)
2) Take off fixing screws for the fin guard and the anchor board.
3) Mount a new fin guard.
Procedure
CAUTION
the fan guard side directs downward.
fan guard.
from the front side and then fix the claws.
CAUTION
(Hexagonal screw Ø4 × 10, 3 pcs.)
Fin guard
and .
1 2
Fixing screws
– 136 –
Remarks
Discharge
Bell mouth port cabinet
Fan guard Hooking claw