Toshiba RAS-M16PKVP-E Service Manual page 127

12-3. Outdoor Unit
No. Part name
Common
1
procedure
Never forget to put on the gloves at working time;
otherwise an injury will be caused by the parts etc.
1. Detachment
1) Stop operation of the air conditioner, and turn
2) Remove the front panel.
3) Remove the power supply cable and the indoor/
4) Remove the upper cabinet.
2. Attachment
1) Mount the upper cabinet.
2) Connect the power supply cable and the indoor/
3) Mount the front panel.
Procedure
CAUTION
off the switch of the breaker.
(Hexagonal screw Ø4 × 10, 5 pcs.)
• After taking off screws, draw the front panel
2 to this side and remove it while pulling the
front panel downward
outdoor connecting wire from the cord clamp
and the terminal.
(Hexagonal screw Ø4 × 10, 4 pcs.)
(Hexagonal screw Ø4 × 10, 4 pcs.)
In this time, insert the fin guard at rear side
between the front panel and the heat
exchanger (at rear side).
outdoor connecting wire to the terminal and
then fix them with the cord clamp.
(Hexagonal screw Ø4 × 10, 5 pcs.)
1 .
– 127 –
Remarks
Front panel
Front panel
Downward Downward Downward
This sid This sid
Upper cabinet
Insert the fin guard at rear side
between the front panel and the
heat exchanger (at rear side).