Toshiba RAS-M16PKVP-E Service Manual page 133

No. Part name
1. Reactor to be attached to the inverter
Replacement
7
of reactor
2. Reactor to be attached to the partition
Procedure
assembly
1) Perform works of Detachment 1 of
.
4
2) Remove the relay connector of the reactor.
3) Remove the reactor cover.
(Truss head B tight screw Ø4 × 6, 4 pcs.)
4) Remove the reactor. (ST1T Ø4 × 6, 2 pcs.)
5) Mount a new reactor.
plate
1) Perform works of Detachment 1 of 1 and
.
4
2) Remove the reactor from the partition plate.
(ST1T Ø4 × 8, 2 pcs.)
3) Mount a new reactor.
Caution to mount the inverter assembly.
When mounting the inverter assembly to the
partition plate, be sure to attach the hooks
certainly.
Hooks
1 and
Partition
plate
– 133 –
Remarks
Reactor cover Reactor
relay connector
Reactor cover Reactor
Partition plate
Reactor