Installing The Log Set - Rinnai Arriva Operation And Installation Manual

Installing the Log Set

4. Place the left hand and front hand front logs into the combustion chamber on the locating
pins.
5. Place the centre top log over the rear main and right hand front logs. Secure on the central
locating pin of each log. Repeat step with the right hand top log, securing log on locating
pins on the right hand side.
Centre
top log
6. Place the left hand bottom log into the combustion chamber so it hides the flame sensor
rod from view. Place the right hand bottom log on the opposite side.
7. Replace combustion chamber glass panel and secure in place with the 2 retaining screws.
rinnai new Zealand Limited
Right hand
top log
Arriva Operation and Installation Manual: 10343-E
35
05-10