Log Set And Granule Pack Installation - Rinnai Neo RIB2312L Installation Manual

Log set and granule pack installation

The granule pack and log set, consisting of five log pieces, comes packaged inside
the appliance. The glass retainer will need to be removed before installing the
granules and log set. Use extreme care when handling the log pieces, they are
made from a fragile material and will damage easily.
Use these instructions in conjunction with the log location guide attached to the glass of the
Neo engine.
It is important to position the pieces in the order shown below. Incorrect placement
can create carbon build-up and affect performance. Malfunctioning due to improper
log placement is not covered by warranty.
IMPORTANT
The unit must never be used with broken logs or other burn media (except the Neo granules).
1. Check to ensure the ports of the main burner
are clean and clear of any particles and all
packaging.
22 | Neo RIB2312 installation guide: 12148-A 01-17
2. Select the thicker 'Y' log and fit into position
by lining up the two pin holes onto the two
pins of the locating bracket that is fixed to the
centre of the main burner.
1