Vtr Memory Bank Function - Sony SRW-5800 Operation Manual

Current setting
Function button
where item is to
be registered
To unregister the selected item
Press the [F6] (BLANK) button.
When a function button with other than the default
assignment is selected, the [F4] (KEY DEF.) button is
valid.
To return the selected function button to its default
setting, press the [F4] (KEY DEF.) button.
5
Press the cursor t button to move the cursor (B) to
the menu list (PF ASSIGN menu), then press the
cursor R or r button to move the cursor to the menu
item to be registered.
To scroll the menu faster
Press the cursor R or r button while holding down the
SFT button.
6
Press the [F7] (PASTE) button to register the item.
The new item is registered to the function button.
7
Repeat steps 3 to 6 to register more items.
To cancel the registration of all new items
Press the [F9] (CANCEL) button.
8
Press the [F10] (SAVE/EXIT) button to save the newly
registered items.
The registration is completed and the SET UP menu
appears in the display again.
40
4-1 Registering and Storing Menu Settings

4-1-4 VTR Memory Bank Function

Eight VTR memory banks are provided for storing up to
eight sets of menu settings.
The contents of all eight VTR memory banks can be stored
on a "Memory Stick".
The storing/recalling of the contents of VTR memory
banks can also be performed through the network.
Current menu settings in the
VTR (CURRENT SETUP).
These settings are stored
outside the VTR memory
banks even when the power
is off.
Storing/recalling
"Memory Stick" (SETUP
BANK 0 to 8). The stick stores
setting data in same way as
the VTR memory banks.
These contents can be later
called up in the VTR.
Item to be
registered For details on "Memory Stick" use, see "4-1-5 "Memory
Stick" Operations" on page 42.
For details on adding titles to the contents of the VTR
memory bank, see "4-1-7 Adding Titles to the Data" on
page 53.
For details on storing and recalling the contents of VTR
memory banks through the network, see "4-1-6 Storing
and Recalling the Contents of VTR Memory Banks
Through the Network" on page 47.
Note
The contents of SETUP BANK
Storing/recalling
VTR memory banks (SETUP
BANK1 to 8 and F). SETUP
BANK F contains the factory-
set menu settings. By calling up
SETUP BANK F, you can
restore all menu items to their
factory settings.
Storing/recalling
cannot be changed.
F