Sony SRW-5800 Operation Manual page 59

8
Press the [F9] (COPY) button while holding down the
SFT button.
The VTR starts to recall the cue point list for the SRW-
5000/5500.
After the recalling process has completed, the title
under the SRW-5000/5500 indication appears under
the SRW-5800 indication.
9
Press the [F10] (EXIT) button.
The MC5000/5500 menu appears again.
Recalling the 50-PIN settings
The 50-PIN settings for the SRW-5000/5500 that has been
stored on a "Memory Stick" can be recalled to this unit.
1
Press the SET UP button.
The SET UP menu appears.
2
Press the ALT button.
The ALT + SETUP menu appears.
3
Press the [F4] (IMPORT DATA) button.
The IMPORT DATA menu appears.
4
Press the [F1] (SRW-5000/5500) button.
The MC5000/5500 menu appears.
5
Press the [F3] (50-PIN) button.
The 50-PIN menu appears.
5 0 - P I N D A T A C O P Y
6
Press the [F9] (COPY) button.
A message asking you to confirm the operation
appears in the display.
To cancel recalling the 50-PIN settings
Press the CLR button while the confirmation message
appears.
7
Press the [F9] (COPY) button while holding down the
SFT button.
The VTR starts to recall the 50-PIN settings for the
SRW-5000/5500.
Note
Since all of the 50-PIN settings of this unit is replaced
with the recalled data, the settings incompatible with
this unit are also copied to this unit.
8
Press the [F10] (EXIT) button.
The MC5000/5500 menu appears again.
Recalling the non-display settings of the
warning messages
The non-display settings of the warning messages for the
SRW-5000/5500 that has been stored on a "Memory
Stick" can be recalled to this unit.
1
Press the SET UP button.
The SET UP menu appears.
2
Press the ALT button.
The ALT + SETUP menu appears.
3
Press the [F4] (IMPORT DATA) button.
The IMPORT DATA menu appears.
4
Press the [F1] (SRW-5000/5500) button.
The MC5000/5500 menu appears.
5
Press the [F4] (CANCEL EDIT) button.
The CANCEL EDIT menu appears.
C A N C E L E D I T D A T A C O P Y
6
Press the [F9] (COPY) button.
A message asking you to confirm the operation
appears in the display.
To cancel recalling the non-display settings of the
warning messages
Press the CLR button while the confirmation message
appears.
4-1 Registering and Storing Menu Settings
59