Sony SRW-5800 Operation Manual page 152

Item number Display
1A NO A3/A4 INPUT
1B NO A5/A6 INPUT
1C NO A7/A8 INPUT
1D NO A9/A10 INPUT
1E NO A11/A12 INPUT
21 REC INHIBIT MODE
22 CASSETTE REC INHIBIT MODE
29 VPID MISMATCH BIT DEPTH
2A VPID MISMATCH COLOR SPACE
2B VPID MISMATCH LINK
INFORMATION
2D INVALID SDI DATA
3B NO LTC REPRODUCED
41 AUX SDI NO SDI A INPUT
42 AUX SDI NO SDI B INPUT
43 AUX SDI INPUT PLL UNLOCK
44 NW TEMPERATURE HIGH
45 NW FAN STOP
46 NW REC INHIBIT MODE
52 NO SUPPORTED PB FORMAT
53 SYSTEM MISMATCH
55 VIDEO PLL UNLOCKED
59 INPUT AUDIO DATA MISMATCH
32.000K
5A INPUT AUDIO DATA MISMATCH
47.056K
61 Tele-File MEMORY IS FULL
62 NO AREA FOR Tele-File DATA
ADDITION
63 INVALID FORMAT Tele-File
64 Tele-File DATA WRITE FAIL
65 NO Tele-File LABEL
66 Tele-File DATA WRITE IS INHIBITED Recording or editing was started with the Tele-File in overall write
67 Tele-File DATA READ FAIL
71 INVALID FORMAT CONVERSION
73 NO REFERENCE INFORMATION
152
Error Messages/Warning Messages/Condition Messages
Meaning
No carrier detected on digital audio input on channels 3 and 4
No carrier detected on digital audio input on channels 5 and 6.
No carrier detected on digital audio input on channels 7 and 8.
No carrier detected on digital audio input on channels 9 and 10.
No carrier detected on digital audio input on channels 11 and 12.
The menu settings are to a mode inhibiting recording, or the tape
format does not allow recording.
The cassette is set to inhibit recording.
The bit depth specified in the VPID of the input signal does not
match the bit length of the system.
The color space specified in the VPID of the input signal does not
match the color space of the system.
The link information specified in the VPID of the input signal does
not match the actual connector connection.
Note
In 3D systems, this warning only appears when 3D is selected in
menu item 922 "VPID Select (3D)".
SDI input signal data is invalid.
LTC signal not detected on the tape.
No signal is input to the AUX INPUT A connector on the HKSR-
5804 board.
No signal is input to the AUX INPUT B connector on the HKSR-
5804 board.
The PLL of the clock generator on the HKSR-5804 board is not
locked to the signal input from the AUX INPUT A or B connector.
The internal temperature of the PLD on the HKSR-5804 is high.
The cooling fan on the HKSR-5804 has stopped.
This unit cannot record while file importing or exporting is in
progress between the web client and this unit.
The recording format cannot be played back by this unit.
The tape cannot be played with the current system settings.
Video lock generator PLL not locked to the video reference signal.
The input audio frequency is wrong.
The input audio frequency is wrong.
The remaining capacity of the Tele-File is low, and therefore the
next recording will overwrite old data.
There is no space at all in the Tele-File.
Parts of the Tele-File format are wrong.
A write to Tele-File error occurred.
The Tele-File could not be recognized, and therefore the cassette is
ejected (HDCAM-SR only).
inhibit mode.
A Tele-File read error occurred.
The settings do not allow format conversion.
Cannot lock because there is no 30 frames/second reference
information in 720/59.94p HD SDI input signals.