Search Control Section; Shuttle Button; Servo Indicator; Rec Inhibit Indicator - Sony SRW-5800 Operation Manual

Note
The ACTIVE LINE setting displayed on page 2 can be
made in the SYSTEM menu under the OTHERS CHECK
menu in the MAINTENANCE menu. The phase settings
displayed on pages 3 to 5 and the settings relating to
META DATA recording displayed on page 6 can be made
in the PHASE SET/META DATA menu under the
ALT+OTHERS CHECK menu in the MAINTENANCE
menu.
For details, refer to the Installation Manual.
b REF SYNC (reference signal) indicators
These indicate the signal selected as the reference signal.
If there is no reference signal input to the selected
connector, the STOP button flashes.
EXT SD: Lights when "extern SD" is selected by the VTR
SETUP menu item 006 "EXTERNAL REFERENCE
select".
EXT HD: Lights when "extern HD" is selected by the
VTR SETUP menu item 006 "EXTERNAL
REFERENCE select".
INPUT VIDEO: Lights when "INPUT" is selected by the
VTR SETUP menu item 005 "SERVO/AV
REFERENCE select".
c SERVO indicator
Lights up when the drum servo and capstan servo are
locked.
d REC INHIBIT indicator
Only when this indicator is not lit, you can make settings
for assemble/insert editing mode, and carry out recording
and playback operations.
The status of this indicator depends on the setting of the
[F2] (REC INH) button in the HOME menu and the state
of the record-protect plug on the cassette.
[F2]
State of the record-
Setting of the
protect plug on the
(REC INH) button in
cassette
the HOME menu
all Recording disabled
Recording allowed
crash REC, video/ Recording disabled
CTL, audio/CTL
Recording allowed
off Recording disabled
Recording allowed
a) Toggling between lit/flashing settings is possible using the VTR SETUP
menu item 104 "REC INHIBIT LAMP FLASHING".
22
2-1 Control Panel

5 Search control section

a SHUTTLE button
Press to enter shuttle mode. In this mode, the button lights
and playback at the speed corresponding to the angle of
rotation of the search dial is possible. The playback speed
range depends on the frame frequency of the unit. In this
mode, the search dial clicks at the positions for 0 (still
picture) and ±10 times normal playback speed (HDCAM/
Digital Betacam) or ±8 times normal playback speed
(HDCAM-SR).
Frame frequency
23.98/24 Hz
25 Hz
29.97/30 Hz
50 Hz
59.94/60 Hz
REC INHIBIT
indicator
b JOG button
Press to select jog mode. In this mode, the button lights up
a)
Lit/flashing
and playback is possible at –1 to +1 times normal speed, ±2
Lit
times normal speed (HDCAM/HDCAM-SR), or ±3 times
a)
Lit/flashing
normal speed (Digital Betacam) (determined by the setting
in the VTR SETUP menu item 107 "JOG DIAL
Unlit
RESPONSE"). In this mode, the search dial does not click.
a)
Lit/flashing
c VAR (variable) button
a)
Unlit
Press to select variable speed playback mode for noiseless
playback in the range from –0.5 to +1 times normal speed
(HDCAM-SR), from –1 to +2 times normal speed
(HDCAM), or from –1 to +3 times normal speed (Digital
Betacam). Playback exceeding this speed range is not
possible. The search dial clicks at the positions for still-
picture and normal playback speed.

1 SHUTTLE button

2 JOG button

3 VAR button
4 Search dial
Playback speed range (for
HDCAM-SR format)
±50 times normal playback speed
±48 times normal playback speed
±40 times normal playback speed
±24 times normal playback speed
±20 times normal playback speed