Sony SRW-5800 Operation Manual page 49

cursor bar to the memory bank where the data is to be
saved.
N E T W O R K 0
To store the current VTR menu settings
Move the cursor (B) to the [C] (CURRENT SETUP)
position.
To store all VTR memory banks
Press the [F7] (SELECT ALL) button.
Note
If there are protected items at the destination end, it is
not possible to select the [F7] (SELECT ALL) button.
5
Move the cursor (B) to the NETWORK side using the
cursor T button, and use the cursor R or r button to
move the cursor (B) to the bank number (NETWORK
side) where the data is to be saved.
The flashing cursor bar indicates the storage
destination.
N E T W O R K
Destination
(flashing)
6
To change the title of the bank, press the [F6] (EDIT
TITLE) button.
For details, see "4-1-7 Adding Titles to the Data" on
page 53.
7
Press the [F9] (COPY) button.
A message asking you to confirm the operation
appears in the display.
8
Press the [F9] (COPY) button while holding down the
SFT button.
Saved data
0
Storage begins.
After the storage is completed, the title of the VTR
memory bank appears on the NETWORK side.
N E T W O R K 0
Preventing accidental erasure after saving settings
Press ALT/[F2] (PROTECT) buttons and a symbol
will appear to the right of the network bank number.
9
Press the [F10] (EXIT) button.
The SET UP menu appears again.
Storing cue point lists to the FTP server
(this unit)
Up to eight pages of cue point lists can be stored to the FTP
server (this unit) along with titles.
Note
The stored data is erased when this unit is turned on.
1
Press the SET UP button.
The SET UP menu appears in the display.
2
Press the [F3] (NETWRK) button.
The NETWRK menu appears in the display.
4-1 Registering and Storing Menu Settings
49