Items Relating To The Hksr-5804 (Nos. B01 To; Items Relating To The Hksr-5804 (Nos. B01 To - Sony SRW-5800 Operation Manual

Item number Item
A23 V CROP POSITION
(FC)
A24 FC LUT MODE

Items Relating to the HKSR-5804 (Nos. B01 to ...)

Item number Item
B01 NW I/O mode
Sub item
SDI mode
BO2 NW MON CTRL
Sub items
LUT
COLOR SPACE
PRE LUT RANGE
POST LUT RANGE [off]
194
Menu List
Setting Function
–238 When "EDGE-CROP" is selected in menu item A21,
adjusts the V crop (vertical direction of portion cut out in
edge crop mode) for FC output.
[0]
238
[off] Selects whether to use LUT, and when LUT is used, selects
Bank-1 the bank in which the LUT file is stored.
Bank-2 off: LUT conversion is disabled.
Bank-3 Bank-1 to Bank-8: Select the LUT file by selecting one of
Bank-4
Bank-5
Bank-6
Bank-7
Bank-8
Setting Function
Performs settings for the signal output to the AUX OUTPUT
A/B connectors.
[MON]
Selects the signal output to the AUX OUTPUT A/B
DUB connectors.
MON: The HD SDI signal is output.
DUB: The signal used for dubbing the tape with non-
Performs settings for the monitor output.
[off]
Selects one of the eight lookup table (LUT) banks.
Bank-1 Off: Does not use any LUT.
Bank-2 Bank 1 to Bank 8: Uses the selected LUT bank.
Bank-3
Bank-4
Bank-5
Bank-6
Bank-7
Bank-8
[RGB]
Selects the monitor output signal.
YCbCr RGB: Outputs an RGB 4:4:4 signal.
YCbCr: Outputs a YCbCr 4:2:2 signal.
[off]
Specifies whether the monitor output signal is extended
HtF from Head to Full before the LUT.
Off: Does not extend from Head to Full before the LUT.
HtF: Extends from Head to Full before the LUT.
Specifies whether the monitor output signal is compressed
FtH from Full to Head after the LUT.
Off: Is not compressed from Full to Head after the LUT.
FtH: Is compressed from Full to Head after the LUT.
Banks 1 to 8.
compressed data (DATA) format is output.