Vtr Memory Bank Function - Sony SRW-5100 Operation Manual

Current setting
Function button
where item is to
be registered
To unregister the selected item
Press the [F6] (BLANK) button.
When a function button with other than the default
assignment is selected, the [F4] (KEY DEF.) button is
valid.
To return the selected function button to its default
setting, press the [F4] (KEY DEF.) button.
5
Press the cursor t button to move the cursor (B) to
the menu list (PF ASSIGN menu), then press the
cursor R or r button to move the cursor to the menu
item to be registered.
To scroll the menu faster
Press the cursor R or r button while holding down the
SFT button.
6
Press the [F7] (PASTE) button to register the item.
The new item is registered to the function button.
7
Repeat steps 3 to 6 to register more items.
To cancel the registration of all new items
Press the [F9] (CANCEL) button.
8
Press the [F10] (SAVE/EXIT) button to save the newly
registered items.
The registration is completed and the SET UP menu
appears in the display again.
36
4-1 Registering and Storing Menu Settings
Note
Function key registration data and the VTR SETUP menu
items are stored in the VTR bank to be commonly used by
the SRW-5100 and SRW-5800. Therefore, on the SRW-
5100, incompatible items are registered to certain function
keys at the factory and such items are shown only on the
PF ASSIGN menu screen. Note that these items appear in
red-shade characters on the PF ASSIGN menu.

4-1-4 VTR Memory Bank Function

Eight VTR memory banks are provided for storing up to
eight sets of menu settings.
The contents of all eight VTR memory banks can be stored
on a "Memory Stick."
Current menu settings in this
unit (CURRENT SETUP).
These settings are stored
outside the VTR memory
banks even when the power
is off.
Storing/recalling
Item to be
registered
"Memory Stick" (SETUP
BANK 0 to 8). The stick stores
setting data in same way as
the VTR memory banks.
These contents can be later
called up in this unit.
For details on "Memory Stick" use, see "4-1-5 "Memory
Stick" Operations" on page 38.
For details on adding titles to the contents of the VTR
memory bank, see "4-1-6 Adding Titles to the Data" on
page 43.
Note
The contents of SETUP BANK
Storing/recalling
VTR memory banks (SETUP
BANK1 to 8 and F). SETUP
BANK F contains the factory-
set menu settings. By calling up
SETUP BANK F, you can
restore all menu items to their
factory settings.
Storing/recalling
cannot be changed.
F