Digital Audio Output Signal Source Track Selection (Digout Exchng); Digital Audio Output Signal Source Track Selection; (Sdout Exchng) - Sony SRW-5800 Operation Manual

You can also make this setting using VTR SETUP menu
item 133 "AUDIO INPUT SOURCE DISPLAY".
4-6-2 Digital Audio Output Signal
Source Track Selection (DIGOUT
EXCHNG)
To make the source track selection for the digital audio
output signal (1 to 12 channels) (audio multiplexed with
HD SDI and SD SDI signals (1 to 8 channels) and AES/
EBU audio output are targeted) on each of channels 1 to
12, use the following procedure.
Note that when [F9] (SDOUT EXCHNG) in the SDOUT
menu is set to "ena", SD SDI source track selection
follows the settings of the SDOUT menu.
Note
When the system of this unit is set to double-speed
recording/playback or when the VTR SETUP menu item
842 "AUDIO INPUT/OUTPUT SAMPLING
FREQUENCY" is set to "96K", the results of source track
selection are not reflected and the source tracks of all
channels remain their default settings.
1
Press the [F3] (DIGOUT EXCHNG) button.
The DIGOUT menu appears, together with a source
track selection window for the digital audio output
signals.
2
Carry out the source track selection for the digital
audio output signal on each channel.
TR1 to TR12: Select the audio signals recorded on
tracks 1 to 12.
3
Press the [F10] (EXIT) button.
This returns to the AUDIO menu screen.
To make output settings for individual channels
with the F buttons
By pressing any of the [F1] (DIGOUT CH1 TR1) to [F8]
(DIGOUT CH8 TR8) buttons, or by pressing ALT button
and then pressing any of the [F1] (DIGOUT CH9) to [F4]
108
4-6 AUDIO Menu
(DIGOUT CH12) buttons in the ALT + DIG OUT menu,
you can select the source track for each channel.
To make input signal selections for individual
channels with the numeric buttons
1
Press the cursor T or t button to move the cursor to
the channel for which you want to make the selection.
2
Press the cursor R or r button to select the source track
to be output.
To return to the default settings
Press the cursor center button. The cursor item returns to
the default.
To revert the source tracks of all channels to
default settings
Press the [F9] (DIGITAL ALL RESET) button in the ALT
+ DIG OUT menu.
The source tracks of all channels return to their default
settings.
You can also make the source track selection using VTR
SETUP menu item 834 "DIGITAL AUDIO OUTPUT
EXCHANGE".
4-6-3 Digital Audio Output Signal
Source Track Selection (SDOUT
EXCHNG)
To make the source track selection for the digital audio
output signal (audio multiplexed with SD SDI), use the
following procedure.
Note
When the system of this unit is set to double-speed
recording/playback or when the VTR SETUP menu item
842 "AUDIO INPUT/OUTPUT SAMPLING
FREQUENCY" is set to "96K", the results of source track
selection are not reflected and the source tracks of all
channels remain their default settings.
1
Press the [F5] (SDOUT EXCHNG) button.
The SDOUT menu appears, together with a source
track selection menu for the digital audio output
signals.