Vtr Memory Bank Function - Sony SRW-5000 Operation Manual

To unregister the selected item
Press the [F6] (BLANK) button.
When a function button with other than the default
assignment is selected, the [F4] (KEY DEF.)
button is valid.
To return the selected function button to its default
setting, press the [F4] (KEY DEF.) button.
5
Press the cursor t button to move the cursor (B)
to the menu list (PF ASSIGN menu), then press the
cursor R or r button to move the cursor to the menu
item to be registered.
To scroll the menu faster
Press the cursor R or r button while holding down
the SFT button.
P A G E F 7 A L T + H O M E V T R S E T U P M E N U -
D M C
F 1 : 0 0 1 6 3 2 : J U M P T C s e l
F 2 : 7 0 5 : Y A O O
F 3 : K 1 7 7 0 6 : M A S T E R ( H D )
F 4 : 7 0 8 : Y L E V E L ( H D )
F 5 : 7 1 0 : P B L V L ( H D )
P A G E
F 6 : 3 0 2 7 1 1 : P R L V L ( H D )
D E F .
F 7 : K 1 8 7 1 2 : S E T U P ( H D )
F 8 : K 2 5 7 1 3 : S Y N C ( H D )
K E Y
F 9 : K 4 4 7 1 4 : F I N E ( H D )
D E F .
B L A N K P A S T E C A N C E L S A V E /
6
Press the [F7] (PASTE) button to register the item.
The new item is registered to the function button.
7
Repeat steps 3 to 6 to register more items.
To cancel the registration of all new items
Press the [F9] (CANCEL) button.
8
Press the [F10] (SAVE/EXIT) button to save the
newly registered items.
The registration is completed and the SET UP
menu appears in the display again.
4-1-4 VTR Memory Bank
Function
Eight VTR memory banks are provided for storing up
to eight sets of menu settings.
The contents of all eight VTR memory banks can be
stored on a memory stick.
Item to be
registered
-
E X I T
Current menu settings in the
VTR (CURRENT SETUP).
These settings are stored
outside the VTR memory
banks even when the power
is off.
VTR memory banks (SETUP
BANK1 to 8 and F). SETUP
BANK F contains the factory-
Storing/recalling
set menu settings. By calling
up SETUP BANK F, you can
restore all menu items to their
factory settings.
Memory stick (SETUP
BANK 0 to 8). The stick
stores setting data in same
way as the VTR memory
banks. These contents can
be later called up in the
VTR.
For details on memory stick use, see "4-1-5 Memory Stick
Function" on page 4-5.
For details on adding titles to the contents of the VTR
memory bank, see "4-1-6 Adding Titles to the Data" on
page 4-11.
Note
The contents of SETUP BANKF cannot be changed.
Storing the current VTR menu settings to
a VTR memory bank
2 3
4 6 1
1
Press the SET UP button.
The SET UP menu appears in the display.
Storing/recalling
Storing/recalling
CLR button
5
(Continued)
4-3
Chapter 4 Menu Settings