Sony SRW-5800 Operation Manual page 27

2 DIGITAL I/O (input/output) section
a HD SDI (SDI video/audio) INPUT A/B connectors
(BNC)
These accept SDI video/audio signals.
Note
The INPUT MONITOR connectors are for use with an
input monitor and does not follow the standards for output.
b HD SDI (SDI video/audio) OUTPUT A/B
connectors (BNC)
These output three sets of SDI video/audio signals.
When the ALT/[F6] (CHARA SUPER) buttons are set to
ON in the TC menu, time data or other text data is
superimposed on the signal output from the MONITOR
connector.
c FORMAT CONV. OUT (OPTION) A/B
connectors (BNC)
These output two sets of format-converted video/audio
signals.
When the ALT/[F5] (FC CHARA) buttons are set to ON in
the TC menu, the output has time data or other text
superimposed on the signal.
Note
This is only valid when the optional HKSR-5001 format
converter board is installed.
1 HD SDI INPUT A/B connectors
2 HD SDI OUTPUT A/B connectors
3 FORMAT CONV. OUT (OPTION) A/B connectors
4 SD SDI OUT 1/2/MONITOR connectors
5 DIGITAL I/O (AES/EBU) OUTPUT connectors
6 DIGITAL I/O (AES/EBU) INPUT connectors
d SD SDI OUT 1/2/MONITOR connectors (BNC)
These output three sets of video/audio signals. When the
ALT/[F6] (CHARA SUPER) buttons are set to ON in the
TC menu, time data or other text data is superimposed on
the output from the MONITOR connector.
e DIGITAL I/O (AES/EBU) OUTPUT connectors
(BNC)
These output digital signals in AES/EBU format for
channels 1 to 12.
f DIGITAL I/O (AES/EBU) INPUT connectors
(BNC)
These accept digital signals in AES/EBU format for
channels 1 to 12.
27
2-2 Connector Panel