External Device Audio Edit Preset Command Replace; Select); Mode Selection (Edit Preset Replace Channel Select) - Sony SRW-5800 Operation Manual

2
Press [F9] (SD OUT EXCHNG) to set the display to
"ena"s.
ena: Enable the settings of this menu.
dis: Disable the settings of this menu, and use the
settings for CH1 to CH8 of DIGOUT EXCHNG.
3
Select the digital audio output signal for each channel.
TR1 to TR2: Output the audio signals recorded on
tracks 1 to 12.
4
Press the [F10] (EXIT) button.
This returns to the AUDIO menu.
Making output settings for individual channels
with the F buttons
By pressing any of the [F1] (SDOUT CH1 TR1) to [F8]
(SDOUT CH8 TR8) buttons, you can select the source
track for each channel.
Making input signal selections for individual
channels with the numeric buttons
1
Press the cursor T or t button, to align the cursor
with the channel for which you want to make the
selection.
2
Press the cursor R or r button, to select the source
channel to be output.
To return to the default settings
Press the cursor center button. The cursor item returns to
the default.
To revert the source tracks of all channels to
default settings
Press the [F9] (SDOUT ALL RESET) button in the
ALT+SD OUT menu.
The source tracks of all channels return to their default
settings.
You can also make the source track selection using the
VTR SETUP menu item 836 "SD AUDIO OUTPUT
EXCHANGE".
4-6-4 External Device Audio Edit
Preset Command Replace Mode
Selection (EDIT PRESET REPLACE
CHANNEL SELECT)
You can replace channel settings for audio edit preset
commands received from editors and other external
devices. This function allows such devices to control
channels 1 to 12 on this unit.
1
Press the ALT/[F2] (REPLCE CH SEL) buttons.
The REPL CH SEL menu appears, together with the
edit preset channel selection menu for each channel on
this unit.
2
Press the [F9] (REPLCE CH SEL) button repeatedly
until "ena" is displayed.
ena: The settings of this menu are enabled.
dis: The settings of this menu are disabled and the
settings made in EDIT PRESET REPLACE
MODE SELECT and ANALOG AUDIO EDIT
PRESET REPLACE are used.
3
Select the edit preset channel for each channel.
CH1 to CH12: The edit preset command of the
selected edit preset channel controls the channel
of this unit.
4
Press the [F10] (EXIT) button.
The ALT+AUDIO menu appears again.
Setting channels for individual tracks using the F
button
You can set channels for individual tracks by pressing the
[F1] (REPLCE TR1) to [F8] (REPLCE TR8) buttons, or by
pressing the ALT button to go to the ALT+REPL CH
menu, and then pressing [F1] (REPLCE TR9) to [F4]
(REPLCE TR12) buttons.
109
4-6 AUDIO Menu