Sony SRW-5800 Operation Manual page 77

To display a warning message
The first 16 characters of the
warning message
Set the VTR SETUP menu item 626 "DISPLAY
INFORMATION select" to any setting other than "time
data only" and set the menu item 627 "CHAR WARNING
DISPLAY at dual line mode" to "on". The first 16
characters of the warning message flashes on the second
line.
For details about the warning messages, see "Warning
Messages" on page 150.
When there are multiple warning messages, each message
flashes twice before it is replaced by the next message.
When there is no warning message, the setting of the VTR
SETUP menu item 626 "DISPLAY INFORMATION
select" flashes on the second line instead.
To display remaining time on the tape
Use the VTR SETUP menu item 628 "REMAIN TIME
DISPLAY" to display remaining time on the tape.
off: Do not display remaining time.
10min: Display remaining time when it is 10 minutes or
less.
on: Always display remaining time.
When remaining time is 23 minutes.
When remaining time is five minutes.
When remaining time to is 100 minutes or over.
Changing the superimpose position
The superimpose position can be set to 16 different
positions in the horizontal directions (0 to 15) and 24
different positions in the vertical directions (0 to 23).
[F7], [F8] buttons
ALT button
To move in the horizontal direction, press the ALT/[F7]
(CHARA H-POS) buttons, and to move in the vertical
direction, press the ALT/[F8] (CHARA V-POS) buttons.
Each cursor button press increments the setting by 1. From
the maximum value, the next value is the minimum value.
Switching to a menu screen other than the TC menu screen
also ends the setting.
77
4-3 TC Menu