Items Relating To The Hksr-5804 (Nos. B01 To; Items Relating To The Hksr-5804 (Nos. B01 To - Sony SRW-5800 Operation Manual

Item number Item
A08 FC REFERENCE
select
A10 9-Pin TC sense
select
A20 Black Clip for 444-
to-422 Conversion

Items Relating to the HKSR-5804 (Nos. B01 to ...)

Item number Item
B01 NW I/O mode
Sub item
SDI mode
174
Menu List
Setting Function
extrn HD Selects the signal to be the reference for the FORMAT
[extrn SD]
CONV. OUT input to the REF. INPUT 2 connector.
extrn HD: Use the HD tri-level reference signal input to the
extrn SD: Use the SD reference signal input to the REF.
[LINE]
Specifies whether or not the time code information of FC
FC output signal is returned when time code sense command
is input through the 9-pin connector.
LINE: Time code information of main output signal is
FC: Time code information of FC output signal is returned.
Notes
• Pulldown output signal and 30-frame/sec time code are
• When editing pulldown output signals with a VTR
[on]
When a 4:4:4 signal is converted to a 4:2:2 signal, this item
off specifies whether the signal that goes below the black level
(040H) is suppressed or not.
on: Signals that drop below the black level are suppressed.
off: Signals that drop below the black level are not
Setting Function
Performs settings for the signal output to the AUX OUTPUT
A/B connectors.
[MON]
Selects the signal output to the AUX OUTPUT A/B
DUB connectors.
MON: The HD SDI signal is output.
DUB: The signal used for dubbing the tape with non-
REF. INPUT 2 connector as the FORMAT CONV. OUT
reference signal.
INPUT 2 connector as the FORMAT CONV. OUT
reference signal.
returned. In pulldown conversion mode, 24-frame/sec
time code information is returned.
In pulldown conversion mode, 30-frame/sec time code
is returned.
synchronized only when this unit is set to PLAY LOCK
mode. To synchronize the signals, set item A05 "PD EXT
SD REF LOCK MODE" to "lock2".
operating in 30F mode, it may not be possible to achieve
sync within 5 seconds. If this occurs, set the preroll time
to 7 seconds.
Also, normal operation is not possible with devices
engaged in player sync.
suppressed.
compressed data (DATA) format is output.