Items Relating To The Time Code (Nos. 601 To; Items Relating To The Time Code (Nos. 601 To - Sony SRW-5100 Operation Manual

Item number Item
506 DRUM ROTATION
TIMER

Items Relating to the Time Code (Nos. 601 to ...)

Item number Item
601 DF/NDF MODE
select
602 TIMER MODE
select
603 TCR MODE select
604 TC2 MODE SEL
Setting Function
1H When menu item 502 or 503 set to "tension release", or
2H when menu item 504 is set to "on", the drum motor of this
3H unit continues to rotate after tension release mode is
[4H]
entered.
8H This menu item sets the time until the unit enters standby
off mode and the drum motor stops rotating after entering
tension release mode.
The selectable time ranges from one to eight hours.
Setting Function
[drop frame]
Selects the running mode for the time code after frame
non-drop frame conversion and the CTL counter.
auto drop frame: drop frame mode ("DF" indication)
non-drop frame: non-drop frame mode ("NDF" indication)
auto: Drop frame / non-drop frame mode is selected
Note
This setting is only active when the frame frequency of the
unit is 29.97 Hz, 59.94 Hz, 30 Hz, or 60 Hz.
CTL Selects the mode for displaying time data.
[TC]
CTL: During playback the CTL signal recorded on the tape
UBIT
TC: The time code value read by the time code reader, or
UBIT: The user bits inserted in the playback time code are
[LTC]
Selects the time code read by the time code reader during
auto playback.
VITC LTC: LTC is read.
auto: If the playback speed is in the range ±1/2 normal
VITC: VITC is read.
UBV Selects the time data appearing in the second line.
UBR UBV: Displays UBV.
CTL UBR: Displays UBR.
VITC CTL: Displays CTL.
auto VITC: Displays VITC.
LTC auto: Displays VITC when the playback speed is in the
[off]
LTC: Displays LTC.
off: Does not display time data in the second line.
automatically on the basis of the frame frequency of
the unit. For 29.97 Hz/59.94 Hz drop frame mode is
selected, and for 30 Hz/60 Hz non-drop frame mode is
selected. The setting of the frame frequency mode is
carried out with the [F9] (OTHERS CHECK)/ [F9]
(SYSTEM) button in MAINTENANCE menu.
is counted, and the tape running time is displayed in
hours, minutes, seconds, and frames.
the time code value generated by the time code
generator is displayed. Use item 603 to toggle between
VITC and LTC.
displayed. Use item 603 to toggle between VITC and
LTC.
speed, VITC is read, and if outside this range LTC is
read.
range ±1/2 normal speed, and LTC if outside this
range.
121
Menu List