Using An External Audio System - Sony DSR-1/1P Operating Instructions Manual

Connecting Audio System
3
Connect an optional output
cable into the OUTPUT
connectors on the BTA-801
and either of the AUDIO IN
CH-1/CH-2 connectors.
Connect the DC power
(supplied with the BTA-801)
cable into the DC 12V IN
connector on the BTA-801 and
the DC OUT connector.
4
Set the AUDIO IN (CH-1/CH-
2) switch (for the tuner-
connected channel) to REAR
and the input selection switch
for the AUDIO IN CH-1/CH-2
connector (where the tuner
cable is connected) to MIC
(center position).

Using an External Audio System

30
Chapter 2 Fitting and Connecting Related Equipment
Connect an audio mixer or other external audio system component to the
AUDIO IN CH-1/CH-2 connector as shown below.
AUDIO IN
CH-1/CH-2
OUTPUT
DC 12V IN
AUDIO IN CH-1/CH-2
DC OUT
AUDIO IN (CH-1/CH-2) switch: Set to REAR.
CH-1 CH-2
AUDIO IN
CAM
REAR
Input selection switch: Set to MIC.
+48V ON
LINE MIC
AUDIO IN (CH-1/CH-2) switch: Set to REAR.
CH-1 CH-2
AUDIO IN
CAM
REAR
Input selection switch: Set to LINE.
+48V ON
LINE MIC
To audio mixer, etc.