Determining The Current Application Version Of The Nxb-Knx; If Current Application Version Is Lower Than V2.0.15 - AMX NetLinx Interface NXB-KNX Operation/Reference Manual

Determining the Current Application Version Of the NXB-KNX

Information on the current application version loaded on the device is displayed in the Application Upgrade
Manager page (FIG. 35).
FIG. 35 Application Upgrade Manager page

If Current Application Version Is Lower Than v2.0.15

1.
Select Application Upgrade from the Admin drop-down menu to open the Application Upgrade page
(FIG. 35 on page 49).
2.
Click Browse, and select the file XXXX2.0.15.jar.
3.
Click Accept.
4.
When the upgrade is complete, reboot the NXB-KNX.
Once the Application upgrade is performed, all subsequent upgrades will be
performed via Netlinx Studio supported Kit file upgrades. See the NetLinx Firmware
Upgrades section on page 43 for details.
NXB-KNX Operation/Reference Guide
One-Time Upgrade of the NXB-KNX to a Native NetLinx Device
49