Additional Documentation - AMX NetLinx Interface NXB-KNX Operation/Reference Manual

NetLinx Firmware Upgrades
NetLinx Studio transfers the files to the NXB-KNX and then tells it to reboot. After it reboots, the
NXB-KNX actually goes through the upgrade process.
If for any reason your Kit file transfer should fail, continue to retry the transfer until
you are successful. DO NOT reboot the NXB-KNX, or change connections until the
transfer is complete. Failure to complete this operation successfully may require a
factory repair of the NXB-KNX.

Additional Documentation

For additional information on using NetLinx Studio, refer to the NetLinx Studio online help and Operation/
Reference Guide (available at www.amx.com).
46
During the upgrade process, the Status LED blinks, and the NXB-KNX stays offline.
Once the upgrade is complete, the LED will stop blinking and the NXB-KNX will come online.
NXB-KNX Operation/Reference Guide